I have a python script that emulates a simple hamlib server (which does some conversion to control SDRSharp) that GPredict can use.

you can find it here:

https://www.dropbox.com/sh/5v6x87kv4kq02g7/AAANexHJ6L4MgCRalXkOq5wta?dl=0

It has lots of comments and should be clear how it works.

Should run on Windows or Linux (careful on Linux with newlines, you may have to copy-paste into a new document to get the formatting to line up)

I use it all of the time running Gpredict and this script on a Raspberry pi which then controls SDRSharp running on a Windows 10 machine elsewhere on my small network.

cheers, Graham ve3gtc

On 2017-11-20 05:36, [email protected] wrote:

Hello

I would like to write a perl script to eventually graph the doppler shift of ISS, Falconsat and Fox1-B over time using LINUX

Has anyone a script that can act as a server that gpredict can connect to and would spit out data ?

I just used netcat and saw data

Just curious someone might have already done this ?

Andrew

---

Sent via [email protected] AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb