Bob:
I have uploaded the drawings for the new E05 60, 140x180
Module, to Eaglepedia. I did this so that people so interested can go there and
look at these drawings.
I plan shortly, however, to modify the PCB and Baseplate
slightly by adding more mounting screws. I have somehow to convey that some of
the added screws are optional depending upon the PCB dissipation. This step to
add more screws is part of the realization that screws spaced 50+mm apart may
not provide sufficiently effective contact of the PCB to the Baseplate. Modules
such as the U Receiver will definitely need the added screws. This tradeoff on
this module is a significant reduction in the need for added heat sinks, and
their attaching screws in the middle of the PCB.
Your timely comments on this module would be appreciated.
’73,