Bill:
Please share with ALL of us the info on the one you've settled on.  I for one, will use it in the design of my terrestrial microwave system . . .

Thanks & 73,
Jim
wb4gcs@amsat.org


Bill Ress wrote:
Hi Juan,

Again - splendid data. Your testing has uncovered an important issue 
with the digital10 MHz oscillator. John, in a prior post has agreed to 
switch to an analog oscillator for rev B, so the issue is behind us, 
again thanks to your efforts. That also gets rid of the only BGA device 
on the board and that did cause you some gas pain early on in the 
assembly phase.

I'm sure John has leads on a analog suitable oscillator but I'll 
communicate with him with the info on the one I settled on.

Happy 4th to all...Bill - N6GHz

Juan Rivera wrote:
  
All,

 

I ran a Temperature Run on the 70cm Receiver in External Reference 
Mode.  Click HERE 
<http://www.juanr.com/pages/hobbies/ham_radio/Eagle/Temperature_Run.htm> 
for details...

 

73,

Juan

    

_______________________________________________
Via the Eagle mailing list courtesy of AMSAT-NA
Eagle@amsat.org
http://amsat.org/mailman/listinfo/eagle