Hi Dave,
I noticed that too. I killed the AGC but didn't think of the noise blanker. I'll take a look and try again if it was on. Right now I can't communicate with the CAN-Do module or I would switch to the 70 cm prototype receiver and repeat the test.
Juan
-----Original Message----- From: Dave hartzell [mailto:hartzell@gmail.com] Sent: Monday, September 03, 2007 9:17 AM To: juan-rivera@sbcglobal.net Cc: eagle@amsat.org; Bill Ress; Dave Black (Home); Dave Black (Work); David Smith; Don Ferguson; Juan.Rivera (Work); Samsonoff@Mac. Com Subject: Re: PAVE PAWS EMI
Juan,
Great recording.
By chance, did you have the Noise Blanker enabled on your Kenwood rig when recording? It sounds like it might have been, with an increase in mute after each pop...
Dave
On 9/3/07, Juan Rivera juan-rivera@sbcglobal.net wrote:
Folks,
In the San Francisco Bay Area it looks like most of the 440 MHZ FM
repeaters
will have to be shut down to avoid interference with the PAVE PAWS radar site at Beale Air Force Base in Marysville. That got me thinking that I might be able to detect the radar from my house even though it is almost
200
miles away and masked by terrain. Sure enough, I think I can. I've captured data and audio and posted it on my web and on EaglePedia.
Click HERE to read my log and listen to the audio.
73,
Juan - WA6HTP