Stephen,
I managed to confuse myself last night so my plan today is to try to retrace my steps and capture the demodulated IF output as a wave file. I'll report back when I have this figured out.
73,
Juan
_____
From: smmoraco@gmail.com [mailto:smmoraco@gmail.com] On Behalf Of Stephen Moraco Sent: Tuesday, July 03, 2007 3:03 AM To: juan-rivera@sbcglobal.net Cc: eagle@amsat.org; Bill Ress; Dave Black (Home); Dave Black (Work); Dave hartzell; David Smith; Don Ferguson; Juan.Rivera (Work); Samsonoff@Mac. Com Subject: Re: [eagle] CAN-Do Causing RF Frequency Jumps in 70 cm Receiver
Juan,
You say it jumps when you start the heartbeat. Are the jumps at the
same frequency as the heartbeat? Are you at a 5Hz poll (for instance)
and are the jumps then 5 times a second? This would indicate that
something in the configure message is causing the jumps.
You suggest that it might be the 3 Sec. watchdog but that doesn't make
sense if the heartbeat is actually running unless the heartbeat is not
communicating with your device... The widget watchdog will not fire if
a configure message for the widget is heard by the widget within the
3 Sec window.
(I can't tell from your writup what's happening so I'm trying to clarify...)
If you see this happen again you can save the CAN traffic log
and send it to me. I might be able to see something in the traffic.
I've been lurking and enjoying reading all of your reports. You've
been doing great work.
I'll be glad to help where I can.
Regards,
Stephen
--