Another ANSOFT class in Boston:

-------- Original Message --------
Subject: Maxwell 3D Training, Burlington MA, January 17-18
Date: Wed, 19 Dec 2007 12:48:20 -0500
From: Ansoft News <no-reply@ansoft.com>
To: K3IO@verizon.net
CC: ANS14


Ansoft Maxwell 3D Training
Maxwell 3D Training
Maxwell 3D Training • January 17–18

AnsoftPlease join us for the next Maxwell® 3D training class on January 17–18 at our regional office in Burlington, MA.

This two-day course uses examples and exercises to provide a comprehensive understanding of Maxwell 3D using the Magnetostatic, Electrostatic, Eddy Current and Transient solvers.

A combination of hands-on examples and instructor lectures will cover the following topics:

  • Basic modeling
  • Material assignment
  • Boundary and source definitions
  • Torque/force computations
  • Inductance/capacitance calculations
  • Solution setup
  • Introduction to parametric simulation using Optimetrics™
  • Field visualization and post-processing

Register:
www.ansoft.com/training

Register

Next Class

Date: 01/17–18
Time: 9a-5p
Agenda: PDF


Instructor:
Dennis Steward
Dennis Steward

Ansoft Corporation • 225 W. Station Square Drive • Pittsburgh, PA 15219 • 412-261-3200

If you no longer wish to receive commercial emails from Ansoft, please go to our Email Removal Request page at www.ansoft.com/membership/removal_request.cfm, enter your email address, and we’ll remove it from our email-distribution list. If you have additional addresses, please enter them as well. These include addresses you use to register for Ansoft events or to download Ansoft SV products, white papers, etc. To review Ansoft’s Privacy Statement, please visit www.ansoft.com/privacy.cfm.