Welcome to the group. I see that there are 2 paths through the P3E 23 cm receiver -- one with ceramic filters and one without. What's the bandwidth of the Rudak output?
73,
John KD6OZH
----- Original Message ----- From: "Miroslav Kasal" kasal@feec.vutbr.cz To: eagle@amsat.org Sent: Thursday, September 21, 2006 18:53 UTC Subject: [eagle] Eagle L-band receiver
Hello Eagle Group,
According to our e-mail correspondence with Bob McGwier today, I would like to repeat my offer to design and build L-band receiver for Eagle. I am designer of P3E L-band receiver (including command receiver and 5 MHz backup oscillator). At present I solve AGC for both mode - analog/SDX. You can see http://www.urel.feec.vutbr.cz/esl/files/Projects/P3E.htm. Already two years ago I promised to built L-band receiver also for Eagle. All my friends from AMSAT-NA showed pleasure, but project managing people didn't ask me officially. So my offer is still valid. Best regards.
Mirek Kasal, OK2AQK AMSAT-NA LM2326 _______________________________________________ Via the Eagle mailing list courtesy of AMSAT-NA Eagle@amsat.org http://amsat.org/mailman/listinfo/eagle