Bob:
Attached are three pdf views of the proposed revised Eagle module,
and open view, fully closed view, and a view w/o the PCB. It has been a lengthy
day getting all of the darned 0.5mm cover bends correct and holes properly
placed for full mating of the cover with the baseplate (such things as 0.581mm
hole placement discrepancies – ugh!). If built from the drawings that can
be made from these objects, there should be a good fit in the real hardware.
I do not presume as to what the “real” next step wants
to be, as I do not propose to make the 2D drawings until the discussions have
settled down to agree that this is what we collectively like, or at least
collectively accept. Please advise.
’73,