Team: Juan rivera needs someone to peer review the correlation between UHF receiver schematic and the about-to-be ordered PCB layout.
All info is available as .pdf so no fancy software etc. is required. Just a couple of hours to do some checking before we commit to production. Those who have been working on it are too close to it and need assistance from an independent observer..
If you can helpout, please contact Juan directly. juan-rivera@sbcglobal.net
Thanks & 73, Jim wb4gcs@amsat.org
What I do not have any assurace of is the placement of the PCB mounting screw holes, fitting to the dimensions of drawing E05 24. Some of my scaling of the pdf give some concern in this matter.
Dick Jansson, KD1K kd1k@amsat.org --------------------------- -----Original Message----- From: eagle-bounces@amsat.org [mailto:eagle-bounces@amsat.org] On Behalf Of Jim Sanford Sent: Sunday, 01 April, 2007 1853 To: 'AMSAT Eagle'; Juan Rivera Subject: [eagle] Urgent need for peer review
Team: Juan rivera needs someone to peer review the correlation between UHF receiver schematic and the about-to-be ordered PCB layout.
All info is available as .pdf so no fancy software etc. is required. Just a couple of hours to do some checking before we commit to production. Those who have been working on it are too close to it and need assistance from an independent observer..
If you can helpout, please contact Juan directly. juan-rivera@sbcglobal.net
Thanks & 73, Jim wb4gcs@amsat.org
participants (2)
-
Dick Jansson-rr
-
Jim Sanford