Sorry I will attempt a re-format...

Following the Teamspeak meeting, the pertinent levels for P3E:

V Tx Phase +10dBm @ 145.895MHz into 50 ohm

V Tx Envelope 2Vp-p into 1kOhm baseband

U/V AGC I/O: 2V full gain, 5V full compression (output capable of ~2.5mA drive)

U band IF in -15dBm @ 10.7MHz into 50 ohm

L band IF in -15dBm @ 10.7MHz into 50 ohm

S band IF out -15dBm @ 10.7MHz into 50 ohm

Howard

-----Original Message----- From: Howard Long [mailto:eagle@howardlong.com] Sent: 11 July 2007 02:59 To: 'AMSAT Eagle' Subject: P3E SDX Design Levels

Folks

Following the Teamspeak meeting, the pertinent levels for P3E:

V Tx Phase +10dBm @ 145.895MHz into 50 ohm V Tx Envelope 2Vp-p into 1kOhm baseband U/V AGC I/O: 2V full gain, 5V full compression (output capable of ~2.5mA drive) U band IF in -15dBm @ 10.7MHz into 50 ohm L band IF in -15dBm @ 10.7MHz into 50 ohm S band IF out -15dBm @ 10.7MHz into 50 ohm

73, Howard G6LVB