70 cm Frequency Stability Tests Results
All,
I should have gone to work today but I ended up working on the 70 cm Receiver all day instead. Today marks a milestone for me -- my first use of audio files. You'll find two in my write up if you click HERE http://www.juanr.com/pages/hobbies/ham_radio/Eagle/Stability.htm . I think they work much better than descriptions and graphs. Now you can hear what I'm talking about...
Have a great 4th! I plan to do a temperature run on the receiver tomorrow to celebrate! Let's see what that internal oscillator does when it's not at room temperature!
P.S. to OSCAR guys... If you have time come on over and help me run this test. I'll probably start early to beat the heat. If you've never been gassed by CO2 before, now is your chance!
73,
Juan - WA6HTP
Hi Juan,
The audio is a fantastic addition to your super analysis regime. Just really fine work!!
I've already addressed the issue of the two 10 MHz oscillators beating as heard in clip #1.
Now what you hear in the second audio clip doesn't surprise me. Just another reason why I remain digitally challenged and analog biased.
The DS4000 is a "digitally" corrected voltage controlled oscillator. I believe what you are hearing is the frequency being corrected in finite digital steps. An analog temperature corrected VCO will not do this. The correction will be continuous and smooth. The key advantage of the "digitally" corrected VCO is the ability to "remotely" correct the frequency with a digital input. I would submit, that feature is not needed for our application.
The "analog" TCVCXO used in the S2 concept converter uses a low cost device (available from several suppliers) and offers +/- 1 PPM stability over temperature (-40 to 85 C).
Regards...Bill - N6GHz
Juan Rivera wrote:
All,
I should have gone to work today but I ended up working on the 70 cm Receiver all day instead. Today marks a milestone for me -- my first use of audio files. You'll find two in my write up if you click HERE http://www.juanr.com/pages/hobbies/ham_radio/Eagle/Stability.htm. I think they work much better than descriptions and graphs. Now you can hear what I’m talking about...
Have a great 4th! I plan to do a temperature run on the receiver tomorrow to celebrate! Let’s see what that internal oscillator does when it’s not at room temperature!
P.S. to OSCAR guys... If you have time come on over and help me run this test. I’ll probably start early to beat the heat. If you’ve never been gassed by CO2 before, now is your chance!
73,
Juan – WA6HTP
Bill: As usual, thanks for your cogent comments and suggestions. 73, Jim
Bill Ress wrote:
Hi Juan,
The audio is a fantastic addition to your super analysis regime. Just really fine work!!
I've already addressed the issue of the two 10 MHz oscillators beating as heard in clip #1.
Now what you hear in the second audio clip doesn't surprise me. Just another reason why I remain digitally challenged and analog biased.
The DS4000 is a "digitally" corrected voltage controlled oscillator. I believe what you are hearing is the frequency being corrected in finite digital steps. An analog temperature corrected VCO will not do this. The correction will be continuous and smooth. The key advantage of the "digitally" corrected VCO is the ability to "remotely" correct the frequency with a digital input. I would submit, that feature is not needed for our application.
The "analog" TCVCXO used in the S2 concept converter uses a low cost device (available from several suppliers) and offers +/- 1 PPM stability over temperature (-40 to 85 C).
Regards...Bill - N6GHz
Juan Rivera wrote:
All,
I should have gone to work today but I ended up working on the 70 cm Receiver all day instead. Today marks a milestone for me -- my first use of audio files. You'll find two in my write up if you click HERE http://www.juanr.com/pages/hobbies/ham_radio/Eagle/Stability.htm. I think they work much better than descriptions and graphs. Now you can hear what I’m talking about...
Have a great 4th! I plan to do a temperature run on the receiver tomorrow to celebrate! Let’s see what that internal oscillator does when it’s not at room temperature!
P.S. to OSCAR guys... If you have time come on over and help me run this test. I’ll probably start early to beat the heat. If you’ve never been gassed by CO2 before, now is your chance!
73,
Juan – WA6HTP
Via the Eagle mailing list courtesy of AMSAT-NA [email protected] http://amsat.org/mailman/listinfo/eagle
Hi Bill,
Aren't all these tools neat? I though you'd like the audio!
I'm thinking that the uplink guys are going to have to weigh in and tell us if these jumps are a problem or not for data. I'd think that they would be for demodulating data and a major annoyance for SSB. It's the sort if subtle stuff that I didn't notice at first. I'm sure there are a few more surprises waiting to be discovered.
I'm curious about the beat since the two oscillators produced IF outputs that were fairly far apart and yet the beat seems to be around 1 Hz. I guess I could try to sniff the internal oscillator to see exactly where it really is.
73,
Juan
-----Original Message----- From: Bill Ress [mailto:[email protected]] Sent: Tuesday, July 03, 2007 6:49 PM To: [email protected] Cc: [email protected] Subject: The DS4000 Digital Controlled TCXO
Hi Juan,
The audio is a fantastic addition to your super analysis regime. Just really fine work!!
I've already addressed the issue of the two 10 MHz oscillators beating as heard in clip #1.
Now what you hear in the second audio clip doesn't surprise me. Just another reason why I remain digitally challenged and analog biased.
The DS4000 is a "digitally" corrected voltage controlled oscillator. I believe what you are hearing is the frequency being corrected in finite digital steps. An analog temperature corrected VCO will not do this. The correction will be continuous and smooth. The key advantage of the "digitally" corrected VCO is the ability to "remotely" correct the frequency with a digital input. I would submit, that feature is not needed for our application.
The "analog" TCVCXO used in the S2 concept converter uses a low cost device (available from several suppliers) and offers +/- 1 PPM stability over temperature (-40 to 85 C).
Regards...Bill - N6GHz
Juan Rivera wrote:
All,
I should have gone to work today but I ended up working on the 70 cm Receiver all day instead. Today marks a milestone for me -- my first use of audio files. You'll find two in my write up if you click HERE http://www.juanr.com/pages/hobbies/ham_radio/Eagle/Stability.htm. I think they work much better than descriptions and graphs. Now you can hear what I'm talking about...
Have a great 4th! I plan to do a temperature run on the receiver tomorrow to celebrate! Let's see what that internal oscillator does when it's not at room temperature!
P.S. to OSCAR guys... If you have time come on over and help me run this test. I'll probably start early to beat the heat. If you've never been gassed by CO2 before, now is your chance!
73,
Juan - WA6HTP
Juan: I can't imagine it NOT being a problem.
For the sake of completeness, let's assume that it IS, and solve it.
Thanks for all your hard work.
73, Jim [email protected]
Juan Rivera wrote:
Hi Bill,
Aren't all these tools neat? I though you'd like the audio!
I'm thinking that the uplink guys are going to have to weigh in and tell us if these jumps are a problem or not for data. I'd think that they would be for demodulating data and a major annoyance for SSB. It's the sort if subtle stuff that I didn't notice at first. I'm sure there are a few more surprises waiting to be discovered.
I'm curious about the beat since the two oscillators produced IF outputs that were fairly far apart and yet the beat seems to be around 1 Hz. I guess I could try to sniff the internal oscillator to see exactly where it really is.
73,
Juan
-----Original Message----- From: Bill Ress [mailto:[email protected]] Sent: Tuesday, July 03, 2007 6:49 PM To: [email protected] Cc: [email protected] Subject: The DS4000 Digital Controlled TCXO
Hi Juan,
The audio is a fantastic addition to your super analysis regime. Just really fine work!!
I've already addressed the issue of the two 10 MHz oscillators beating as heard in clip #1.
Now what you hear in the second audio clip doesn't surprise me. Just another reason why I remain digitally challenged and analog biased.
The DS4000 is a "digitally" corrected voltage controlled oscillator. I believe what you are hearing is the frequency being corrected in finite digital steps. An analog temperature corrected VCO will not do this. The correction will be continuous and smooth. The key advantage of the "digitally" corrected VCO is the ability to "remotely" correct the frequency with a digital input. I would submit, that feature is not needed for our application.
The "analog" TCVCXO used in the S2 concept converter uses a low cost device (available from several suppliers) and offers +/- 1 PPM stability over temperature (-40 to 85 C).
Regards...Bill - N6GHz
Juan Rivera wrote:
All,
I should have gone to work today but I ended up working on the 70 cm Receiver all day instead. Today marks a milestone for me -- my first use of audio files. You'll find two in my write up if you click HERE http://www.juanr.com/pages/hobbies/ham_radio/Eagle/Stability.htm. I think they work much better than descriptions and graphs. Now you can hear what I'm talking about...
Have a great 4th! I plan to do a temperature run on the receiver tomorrow to celebrate! Let's see what that internal oscillator does when it's not at room temperature!
P.S. to OSCAR guys... If you have time come on over and help me run this test. I'll probably start early to beat the heat. If you've never been gassed by CO2 before, now is your chance!
73,
Juan - WA6HTP
Via the Eagle mailing list courtesy of AMSAT-NA [email protected] http://amsat.org/mailman/listinfo/eagle
Jim and group,
I can't either, but here's another area where we need requirements. How stable does this receiver need to be to satisfy the needs of the users? Is it driven by the human ear or the ability of a data decoder to stay locked up? - We need long term / short term requirements?
I'm getting set up to do a temperature run tomorrow. I just ran the radio from +26C to +50C to get an idea what to expect. Here's what I found:
That missing chunk in the middle is me re-patching my test equipment. When I saw those saw-tooth's I wanted to hook the TS-2000 up so I could listen again. Sure enough they are jumps in frequency just as the chart shows. Each "tooth" is made of multiple data points so this is not the +/- 1 digit LSB frequency counter error I mentioned earlier.
For this preliminary test I didn't have a temperature probe inside the radio so I don't know how close to +50 it actually got. Tomorrow I'll do a much more thorough job and take it down to about -30C. I'm thinking -30C to +50C. Any other suggestions as to temp extremes?
Juan
_____
From: Jim Sanford [mailto:[email protected]] Sent: Tuesday, July 03, 2007 8:08 PM To: [email protected] Cc: 'Bill Ress'; [email protected] Subject: Re: [eagle] Re: The DS4000 Digital Controlled TCXO
Juan: I can't imagine it NOT being a problem.
For the sake of completeness, let's assume that it IS, and solve it.
Thanks for all your hard work.
73, Jim [email protected]
Juan Rivera wrote:
Hi Bill,
Aren't all these tools neat? I though you'd like the audio!
I'm thinking that the uplink guys are going to have to weigh in and tell us if these jumps are a problem or not for data. I'd think that they would be for demodulating data and a major annoyance for SSB. It's the sort if subtle stuff that I didn't notice at first. I'm sure there are a few more surprises waiting to be discovered.
I'm curious about the beat since the two oscillators produced IF outputs that were fairly far apart and yet the beat seems to be around 1 Hz. I guess I could try to sniff the internal oscillator to see exactly where it really is.
73,
Juan
-----Original Message----- From: Bill Ress [mailto:[email protected]] Sent: Tuesday, July 03, 2007 6:49 PM To: [email protected] Cc: [email protected] Subject: The DS4000 Digital Controlled TCXO
Hi Juan,
The audio is a fantastic addition to your super analysis regime. Just really fine work!!
I've already addressed the issue of the two 10 MHz oscillators beating as heard in clip #1.
Now what you hear in the second audio clip doesn't surprise me. Just another reason why I remain digitally challenged and analog biased.
The DS4000 is a "digitally" corrected voltage controlled oscillator. I believe what you are hearing is the frequency being corrected in finite digital steps. An analog temperature corrected VCO will not do this. The correction will be continuous and smooth. The key advantage of the "digitally" corrected VCO is the ability to "remotely" correct the frequency with a digital input. I would submit, that feature is not needed for our application.
The "analog" TCVCXO used in the S2 concept converter uses a low cost device (available from several suppliers) and offers +/- 1 PPM stability over temperature (-40 to 85 C).
Regards...Bill - N6GHz
Juan Rivera wrote:
All,
I should have gone to work today but I ended up working on the 70 cm Receiver all day instead. Today marks a milestone for me -- my first use of audio files. You'll find two in my write up if you click HERE http://www.juanr.com/pages/hobbies/ham_radio/Eagle/Stability.htm http://www.juanr.com/pages/hobbies/ham_radio/Eagle/Stability.htm. I think they work much better than descriptions and graphs. Now you can hear what I'm talking about...
Have a great 4th! I plan to do a temperature run on the receiver tomorrow to celebrate! Let's see what that internal oscillator does when it's not at room temperature!
P.S. to OSCAR guys... If you have time come on over and help me run this test. I'll probably start early to beat the heat. If you've never been gassed by CO2 before, now is your chance!
73,
Juan - WA6HTP
_______________________________________________ Via the Eagle mailing list courtesy of AMSAT-NA [email protected] http://amsat.org/mailman/listinfo/eagle
Juan: Based on what I REMEMBER (I'm senile, so take it with a pound of salt) -30 to +50C is plenty at this point.
Thanks for all you're doing. You are producing good data and articulating valid concerns, which I'd rather deal with NOW than ON ORBIT.
Happy Independence Day to all. Please take some time out to enjoy family, celebrate our Nation, honor our Veterans, and spend some time in what my wife calls, "Norman Rockwell America." Thanks & very 73, Jim [email protected]
Juan Rivera wrote:
Jim and group,
I can't either, but here's another area where we need requirements. How stable does this receiver need to be to satisfy the needs of the users? Is it driven by the human ear or the ability of a data decoder to stay locked up? - We need long term / short term requirements?
I'm getting set up to do a temperature run tomorrow. I just ran the radio from +26C to +50C to get an idea what to expect. Here's what I found:
That missing chunk in the middle is me re-patching my test equipment. When I saw those saw-tooth's I wanted to hook the TS-2000 up so I could listen again. Sure enough they are jumps in frequency just as the chart shows. Each "tooth" is made of multiple data points so this is not the +/- 1 digit LSB frequency counter error I mentioned earlier.
For this preliminary test I didn't have a temperature probe inside the radio so I don't know how close to +50 it actually got. Tomorrow I'll do a much more thorough job and take it down to about -30C. I'm thinking -30C to +50C. Any other suggestions as to temp extremes?
Juan
*From:* Jim Sanford [mailto:[email protected]] *Sent:* Tuesday, July 03, 2007 8:08 PM *To:* [email protected] *Cc:* 'Bill Ress'; [email protected] *Subject:* Re: [eagle] Re: The DS4000 Digital Controlled TCXO
Juan: I can't imagine it NOT being a problem.
For the sake of completeness, let's assume that it IS, and solve it.
Thanks for all your hard work.
73, Jim [email protected] mailto:[email protected]
Juan Rivera wrote:
Hi Bill,
Aren't all these tools neat? I though you'd like the audio!
I'm thinking that the uplink guys are going to have to weigh in and tell us
if these jumps are a problem or not for data. I'd think that they would be
for demodulating data and a major annoyance for SSB. It's the sort if
subtle stuff that I didn't notice at first. I'm sure there are a few more
surprises waiting to be discovered.
I'm curious about the beat since the two oscillators produced IF outputs
that were fairly far apart and yet the beat seems to be around 1 Hz. I
guess I could try to sniff the internal oscillator to see exactly where it
really is.
73,
Juan
-----Original Message-----
From: Bill Ress [mailto:[email protected]]
Sent: Tuesday, July 03, 2007 6:49 PM
To: [email protected] mailto:[email protected]
Cc: [email protected] mailto:[email protected]
Subject: The DS4000 Digital Controlled TCXO
Hi Juan,
The audio is a fantastic addition to your super analysis regime. Just
really fine work!!
I've already addressed the issue of the two 10 MHz oscillators beating
as heard in clip #1.
Now what you hear in the second audio clip doesn't surprise me. Just
another reason why I remain digitally challenged and analog biased.
The DS4000 is a "digitally" corrected voltage controlled oscillator. I
believe what you are hearing is the frequency being corrected in finite
digital steps. An analog temperature corrected VCO will not do this. The
correction will be continuous and smooth. The key advantage of the
"digitally" corrected VCO is the ability to "remotely" correct the
frequency with a digital input. I would submit, that feature is not
needed for our application.
The "analog" TCVCXO used in the S2 concept converter uses a low cost
device (available from several suppliers) and offers +/- 1 PPM stability
over temperature (-40 to 85 C).
Regards...Bill - N6GHz
Juan Rivera wrote:
All,
I should have gone to work today but I ended up working on the 70 cm
Receiver all day instead. Today marks a milestone for me -- my first
use of audio files. You'll find two in my write up if you click HERE
http://www.juanr.com/pages/hobbies/ham_radio/Eagle/Stability.htm. I
think they work much better than descriptions and graphs. Now you can
hear what I'm talking about...
Have a great 4th! I plan to do a temperature run on the receiver
tomorrow to celebrate! Let's see what that internal oscillator does
when it's not at room temperature!
P.S. to OSCAR guys... If you have time come on over and help me run
this test. I'll probably start early to beat the heat. If you've never
been gassed by CO2 before, now is your chance!
73,
Juan - WA6HTP
Via the Eagle mailing list courtesy of AMSAT-NA
Yes indeed, Jim.- a happy and safe Independence Day to you all.
The BBQ's cleaned (well sorta) and ready for tomorrow's hot dogs and hamburgers!!!
Regards...Bill - N6GHz
Jim Sanford wrote:
Juan: Based on what I REMEMBER (I'm senile, so take it with a pound of salt) -30 to +50C is plenty at this point.
Thanks for all you're doing. You are producing good data and articulating valid concerns, which I'd rather deal with NOW than ON ORBIT.
Happy Independence Day to all. Please take some time out to enjoy family, celebrate our Nation, honor our Veterans, and spend some time in what my wife calls, "Norman Rockwell America." Thanks & very 73, Jim [email protected]
Juan Rivera wrote:
Jim and group,
I can’t either, but here’s another area where we need requirements. How stable does this receiver need to be to satisfy the needs of the users? Is it driven by the human ear or the ability of a data decoder to stay locked up? – We need long term / short term requirements?
I’m getting set up to do a temperature run tomorrow. I just ran the radio from +26C to +50C to get an idea what to expect. Here’s what I found:
That missing chunk in the middle is me re-patching my test equipment. When I saw those saw-tooth’s I wanted to hook the TS-2000 up so I could listen again. Sure enough they are jumps in frequency just as the chart shows. Each “tooth” is made of multiple data points so this is not the +/- 1 digit LSB frequency counter error I mentioned earlier.
For this preliminary test I didn’t have a temperature probe inside the radio so I don’t know how close to +50 it actually got. Tomorrow I’ll do a much more thorough job and take it down to about -30C. I’m thinking -30C to +50C. Any other suggestions as to temp extremes?
Juan
*From:* Jim Sanford [mailto:[email protected]] *Sent:* Tuesday, July 03, 2007 8:08 PM *To:* [email protected] *Cc:* 'Bill Ress'; [email protected] *Subject:* Re: [eagle] Re: The DS4000 Digital Controlled TCXO
Juan: I can't imagine it NOT being a problem.
For the sake of completeness, let's assume that it IS, and solve it.
Thanks for all your hard work.
73, Jim [email protected] mailto:[email protected]
Juan Rivera wrote:
Hi Bill,
Aren't all these tools neat? I though you'd like the audio!
I'm thinking that the uplink guys are going to have to weigh in and tell us if these jumps are a problem or not for data. I'd think that they would be for demodulating data and a major annoyance for SSB. It's the sort if subtle stuff that I didn't notice at first. I'm sure there are a few more surprises waiting to be discovered.
I'm curious about the beat since the two oscillators produced IF outputs that were fairly far apart and yet the beat seems to be around 1 Hz. I guess I could try to sniff the internal oscillator to see exactly where it really is.
73,
Juan
-----Original Message----- From: Bill Ress [mailto:[email protected]] Sent: Tuesday, July 03, 2007 6:49 PM To: [email protected] mailto:[email protected] Cc: [email protected] mailto:[email protected] Subject: The DS4000 Digital Controlled TCXO
Hi Juan,
The audio is a fantastic addition to your super analysis regime. Just really fine work!!
I've already addressed the issue of the two 10 MHz oscillators beating as heard in clip #1.
Now what you hear in the second audio clip doesn't surprise me. Just another reason why I remain digitally challenged and analog biased.
The DS4000 is a "digitally" corrected voltage controlled oscillator. I believe what you are hearing is the frequency being corrected in finite digital steps. An analog temperature corrected VCO will not do this. The correction will be continuous and smooth. The key advantage of the "digitally" corrected VCO is the ability to "remotely" correct the frequency with a digital input. I would submit, that feature is not needed for our application.
The "analog" TCVCXO used in the S2 concept converter uses a low cost device (available from several suppliers) and offers +/- 1 PPM stability over temperature (-40 to 85 C).
Regards...Bill - N6GHz
Juan Rivera wrote:
All,
I should have gone to work today but I ended up working on the 70 cm Receiver all day instead. Today marks a milestone for me -- my first use of audio files. You'll find two in my write up if you click HERE http://www.juanr.com/pages/hobbies/ham_radio/Eagle/Stability.htm. I think they work much better than descriptions and graphs. Now you can hear what I'm talking about...
Have a great 4th! I plan to do a temperature run on the receiver tomorrow to celebrate! Let's see what that internal oscillator does when it's not at room temperature!
P.S. to OSCAR guys... If you have time come on over and help me run this test. I'll probably start early to beat the heat. If you've never been gassed by CO2 before, now is your chance!
73,
Juan - WA6HTP
Via the Eagle mailing list courtesy of AMSAT-NA [email protected] mailto:[email protected] http://amsat.org/mailman/listinfo/eagle
The DS4000 does temperature compensation digitally and this graph may show the resolution. The accuracy is 1 PPM so I suppose that the oscillator can hunt around within that range. We can use an analog TCXO in rev. B.
73,
John KD6OZH ----- Original Message ----- From: Juan Rivera To: 'Jim Sanford' Cc: [email protected] Sent: Wednesday, July 04, 2007 03:29 UTC Subject: [eagle] Re: The DS4000 Digital Controlled TCXO
Jim and group,
I can't either, but here's another area where we need requirements. How stable does this receiver need to be to satisfy the needs of the users? Is it driven by the human ear or the ability of a data decoder to stay locked up? - We need long term / short term requirements?
I'm getting set up to do a temperature run tomorrow. I just ran the radio from +26C to +50C to get an idea what to expect. Here's what I found:
That missing chunk in the middle is me re-patching my test equipment. When I saw those saw-tooth's I wanted to hook the TS-2000 up so I could listen again. Sure enough they are jumps in frequency just as the chart shows. Each "tooth" is made of multiple data points so this is not the +/- 1 digit LSB frequency counter error I mentioned earlier.
For this preliminary test I didn't have a temperature probe inside the radio so I don't know how close to +50 it actually got. Tomorrow I'll do a much more thorough job and take it down to about -30C. I'm thinking -30C to +50C. Any other suggestions as to temp extremes?
Juan
------------------------------------------------------------------------------
From: Jim Sanford [mailto:[email protected]] Sent: Tuesday, July 03, 2007 8:08 PM To: [email protected] Cc: 'Bill Ress'; [email protected] Subject: Re: [eagle] Re: The DS4000 Digital Controlled TCXO
Juan: I can't imagine it NOT being a problem.
For the sake of completeness, let's assume that it IS, and solve it.
Thanks for all your hard work.
73, Jim [email protected]
Juan Rivera wrote:
Hi Bill, Aren't all these tools neat? I though you'd like the audio! I'm thinking that the uplink guys are going to have to weigh in and tell usif these jumps are a problem or not for data. I'd think that they would befor demodulating data and a major annoyance for SSB. It's the sort ifsubtle stuff that I didn't notice at first. I'm sure there are a few moresurprises waiting to be discovered. I'm curious about the beat since the two oscillators produced IF outputsthat were fairly far apart and yet the beat seems to be around 1 Hz. Iguess I could try to sniff the internal oscillator to see exactly where itreally is. 73, Juan -----Original Message-----From: Bill Ress [mailto:[email protected]] Sent: Tuesday, July 03, 2007 6:49 PMTo: [email protected]: [email protected]: The DS4000 Digital Controlled TCXO Hi Juan, The audio is a fantastic addition to your super analysis regime. Just really fine work!! I've already addressed the issue of the two 10 MHz oscillators beating as heard in clip #1. Now what you hear in the second audio clip doesn't surprise me. Just another reason why I remain digitally challenged and analog biased. The DS4000 is a "digitally" corrected voltage controlled oscillator. I believe what you are hearing is the frequency being corrected in finite digital steps. An analog temperature corrected VCO will not do this. The correction will be continuous and smooth. The key advantage of the "digitally" corrected VCO is the ability to "remotely" correct the frequency with a digital input. I would submit, that feature is not needed for our application. The "analog" TCVCXO used in the S2 concept converter uses a low cost device (available from several suppliers) and offers +/- 1 PPM stability over temperature (-40 to 85 C). Regards...Bill - N6GHz Juan Rivera wrote: All, I should have gone to work today but I ended up working on the 70 cm Receiver all day instead. Today marks a milestone for me -- my first use of audio files. You'll find two in my write up if you click HERE http://www.juanr.com/pages/hobbies/ham_radio/Eagle/Stability.htm. I think they work much better than descriptions and graphs. Now you can hear what I'm talking about... Have a great 4th! I plan to do a temperature run on the receiver tomorrow to celebrate! Let's see what that internal oscillator does when it's not at room temperature! P.S. to OSCAR guys... If you have time come on over and help me run this test. I'll probably start early to beat the heat. If you've never been gassed by CO2 before, now is your chance! 73, Juan - WA6HTP _______________________________________________Via the Eagle mailing list courtesy of [email protected]http://amsat.org/mailman/listinfo/eagle
------------------------------------------------------------------------------
_______________________________________________ Via the Eagle mailing list courtesy of AMSAT-NA [email protected] http://amsat.org/mailman/listinfo/eagle
The requirement is +60 C so test up to +70 C.
73,
John KD6OZH ----- Original Message ----- From: Jim Sanford To: [email protected] Cc: [email protected] Sent: Wednesday, July 04, 2007 04:08 UTC Subject: [eagle] Re: The DS4000 Digital Controlled TCXO
Juan: Based on what I REMEMBER (I'm senile, so take it with a pound of salt) -30 to +50C is plenty at this point.
Thanks for all you're doing. You are producing good data and articulating valid concerns, which I'd rather deal with NOW than ON ORBIT.
Happy Independence Day to all. Please take some time out to enjoy family, celebrate our Nation, honor our Veterans, and spend some time in what my wife calls, "Norman Rockwell America." Thanks & very 73, Jim [email protected]
Juan Rivera wrote:
Jim and group,
I can't either, but here's another area where we need requirements. How stable does this receiver need to be to satisfy the needs of the users? Is it driven by the human ear or the ability of a data decoder to stay locked up? - We need long term / short term requirements?
I'm getting set up to do a temperature run tomorrow. I just ran the radio from +26C to +50C to get an idea what to expect. Here's what I found:
That missing chunk in the middle is me re-patching my test equipment. When I saw those saw-tooth's I wanted to hook the TS-2000 up so I could listen again. Sure enough they are jumps in frequency just as the chart shows. Each "tooth" is made of multiple data points so this is not the +/- 1 digit LSB frequency counter error I mentioned earlier.
For this preliminary test I didn't have a temperature probe inside the radio so I don't know how close to +50 it actually got. Tomorrow I'll do a much more thorough job and take it down to about -30C. I'm thinking -30C to +50C. Any other suggestions as to temp extremes?
Juan
----------------------------------------------------------------------------
From: Jim Sanford [mailto:[email protected]] Sent: Tuesday, July 03, 2007 8:08 PM To: [email protected] Cc: 'Bill Ress'; [email protected] Subject: Re: [eagle] Re: The DS4000 Digital Controlled TCXO
Juan: I can't imagine it NOT being a problem.
For the sake of completeness, let's assume that it IS, and solve it.
Thanks for all your hard work.
73, Jim [email protected]
Juan Rivera wrote:
Hi Bill, Aren't all these tools neat? I though you'd like the audio! I'm thinking that the uplink guys are going to have to weigh in and tell usif these jumps are a problem or not for data. I'd think that they would befor demodulating data and a major annoyance for SSB. It's the sort ifsubtle stuff that I didn't notice at first. I'm sure there are a few moresurprises waiting to be discovered. I'm curious about the beat since the two oscillators produced IF outputsthat were fairly far apart and yet the beat seems to be around 1 Hz. Iguess I could try to sniff the internal oscillator to see exactly where itreally is. 73, Juan -----Original Message-----From: Bill Ress [mailto:[email protected]] Sent: Tuesday, July 03, 2007 6:49 PMTo: [email protected]: [email protected]: The DS4000 Digital Controlled TCXO Hi Juan, The audio is a fantastic addition to your super analysis regime. Just really fine work!! I've already addressed the issue of the two 10 MHz oscillators beating as heard in clip #1. Now what you hear in the second audio clip doesn't surprise me. Just another reason why I remain digitally challenged and analog biased. The DS4000 is a "digitally" corrected voltage controlled oscillator. I believe what you are hearing is the frequency being corrected in finite digital steps. An analog temperature corrected VCO will not do this. The correction will be continuous and smooth. The key advantage of the "digitally" corrected VCO is the ability to "remotely" correct the frequency with a digital input. I would submit, that feature is not needed for our application. The "analog" TCVCXO used in the S2 concept converter uses a low cost device (available from several suppliers) and offers +/- 1 PPM stability over temperature (-40 to 85 C). Regards...Bill - N6GHz Juan Rivera wrote: All, I should have gone to work today but I ended up working on the 70 cm Receiver all day instead. Today marks a milestone for me -- my first use of audio files. You'll find two in my write up if you click HERE http://www.juanr.com/pages/hobbies/ham_radio/Eagle/Stability.htm. I think they work much better than descriptions and graphs. Now you can hear what I'm talking about... Have a great 4th! I plan to do a temperature run on the receiver tomorrow to celebrate! Let's see what that internal oscillator does when it's not at room temperature! P.S. to OSCAR guys... If you have time come on over and help me run this test. I'll probably start early to beat the heat. If you've never been gassed by CO2 before, now is your chance! 73, Juan - WA6HTP _______________________________________________Via the Eagle mailing list courtesy of [email protected]http://amsat.org/mailman/listinfo/eagle
------------------------------------------------------------------------------
_______________________________________________ Via the Eagle mailing list courtesy of AMSAT-NA [email protected] http://amsat.org/mailman/listinfo/eagle
Hi John,
See the report I just posted. I only went up to about +43C. I doubt my chamber will go to +70. It's much too hot in here to do anything until evening now. I plan to run again with the receiver in external reference mode to see if all the bad Juju goes away.
73,
Juan
_____
From: John B. Stephensen [mailto:[email protected]] Sent: Wednesday, July 04, 2007 12:25 PM To: Jim Sanford; [email protected] Cc: [email protected] Subject: Re: [eagle] Re: The DS4000 Digital Controlled TCXO
The requirement is +60 C so test up to +70 C.
73,
John
KD6OZH
participants (4)
-
Bill Ress -
Jim Sanford -
John B. Stephensen -
Juan Rivera