Speaking of "the next size up", Rich, in testing with the "Jonathan board" actually hand-wound an inductor with something like #22 wire around a pencil. I tried to do that and solder it on, but had no luck. Even that wire is huge compared to the pads :-)
73,
Burns Fisher, WB1FJ *AMSAT(R) Engineering -- Flight Software*
On Fri, Apr 28, 2023 at 9:26 AM Chris Thompson via pacsat-dev < [email protected]> wrote:
Jim,
I changed the inductor to 91nH and now it ranges from 137MHz to 151MHz. Seems good. I agree from your other email that the exact value will be dependent on the layout of the final board and stray inductance etc.
BTW, I didn't have the 91nH in the right size (only 82 and 100). So I had to squish in the next size up. But that seems to work.
73 Chris
-- Chris E. Thompson [email protected] [email protected]
pacsat-dev mailing list -- [email protected] View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to [email protected] Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org