9 Jan
2024
9 Jan
'24
6:09 p.m.
I have a simple Blinky program working no the board. with this running we are pulling about 180 mA from the 5V supply. Still have things on the board that are not turned on yet.
This is what i did to get it working…
Using Halcogen I configured the Drivers, Pinmux and Het1.
Then I only had to write a short program in sys_main.c. All attached here.
Jim, your blinky code is not blinking LEDs. I checked with a scope also.
Bob
[cid:456074cb-4cb8-4751-a668-4e8d68b4f9bf@namprd13.prod.outlook.com] [cid:faf160c4-7694-4e91-80ec-8fc711fba8db@namprd13.prod.outlook.com] [cid:4e63e5e1-c5e2-42b3-bad6-08ad0187312b@namprd13.prod.outlook.com]
