Burns,
I believe the copy on GitHub was printed but here is one I just made which for sure is printed. Note this is Rev D and includes some changes but most of these are not related to software.
I am also attaching the spread sheet I did in the past and updated recently which is a list of pin assignments from the CPU. This is easier to work with for a software reference.
Bob
On Jan 31, 2024, at 12:18 PM, Burns Fisher (AMSAT) via pacsat-dev <pacsat-dev@amsat.orgmailto:pacsat-dev@amsat.org> wrote:
Actually, I just found them on the PC104. 73,
Burns Fisher, WB1FJ AMSAT(R) Engineering -- Flight Software
On Wed, Jan 31, 2024 at 1:13 PM Burns Fisher (AMSAT) <wb1fj@fisher.ccmailto:wb1fj@fisher.cc> wrote: Hi Bob,
I'm just getting started on software for the Blinky, but to do that, I need to find things on the schematic. I found the schematic on gihub (Schematic_231004.pdf) but it is not searchable, so I really can't find (easily) where traces connect. For example, I found "UART_TX1 (as well as RX1,2 and Tx2) but can't easily see what they connect to. Is there a header somewhere (I could not see that on the physical board).
If you can tell me where the UART lines go reasonbly soon, that would help, but in the slightly longer term if you can make a KiCad PDF schematic with the "plot" command rather than the "print" command (the ONLY thing that I know about Kicad, I might add), that will produce a PDF with actual text in it such that it can be searched.
Thanks!
73,
Burns Fisher, WB1FJ AMSAT(R) Engineering -- Flight Software
-----------------------------------------------------------
pacsat-dev mailing list -- pacsat-dev@amsat.orgmailto:pacsat-dev@amsat.org View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email to pacsat-dev-leave@amsat.orgmailto:pacsat-dev-leave@amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org