On Thu, Apr 27, 2023 at 08:48:16PM -0500, Corey Minyard wrote:
> On Thu, Apr 27, 2023 at 08:42:09PM -0500, Corey Minyard wrote:
> > On Fri, Apr 28, 2023 at 01:29:19AM +0000, Burns Fisher (AMSAT) via pacsat-dev wrote:
> > > 1)  The pins to use on the launchpad are j2 pin 3 (RX) and 4 (Tx).  Nearby,
> > > J3 pin 2 is ground.  Note that each row is a different "J" number on the
> > > board, and the count 1,2,3 etc from the USB connector end.  Jim numbered
> > > them on his schematic somewhat more sensibly, but they don't match the
> > > board.
> >
> > Looking at the launchpad schematic, are you sure that's not J3?
>
> Oh, wait, I got the wrong launchpad board.  Never mind.

It's working fine now.  Thanks.

-corey

>
> -corey
>
> >
> > -corey