I was just going to use my existing cables to test it. Bob may need those. Not sure what JTAG connector he used on his board. If this actually works, we should order maybe 10. We might need some for Golf too so maybe 20.
73,
Burns Fisher, WB1FJ *AMSAT(R) Engineering -- Flight Software*
On Fri, Dec 8, 2023 at 10:56 AM Zach Metzinger zmetzing@pobox.com wrote:
On 12/8/23 09:41, Burns Fisher (AMSAT) wrote:
Thanks, Zach. That might mean that what I ordered is different. See in the picture, the place where you added the connector is not populated. (You have to hover over it to get the expanded version in order to see
it).
https://www.newark.com/texas-instruments/cc-devpack-debug/debugger-devpak-si...
<
https://www.newark.com/texas-instruments/cc-devpack-debug/debugger-devpak-si...
Well see what happens. Actually do you have a couple of male connectors that you could send me? That way, I could easily add it in and test the new board (assuming it comes...maybe you'd better wait until I get a shipping number :-) )
Ah, yep. It looks like they took that connector off -- which is nice: now you don't have to unsolder anything!
I do have a few connectors, but just in case, here's the part # you'll need to order: FTSH-105-01-L-D-K
The ribbon cable will then be FFSD-05-D-06.00-01-N to connect the
RTIHU to the modified CC-DEVPACK-DEBUG.
--- Zach N0ZGO