28 Apr
2023
28 Apr
'23
1:42 a.m.
On Fri, Apr 28, 2023 at 01:29:19AM +0000, Burns Fisher (AMSAT) via pacsat-dev wrote:
- The pins to use on the launchpad are j2 pin 3 (RX) and 4 (Tx). Nearby,
J3 pin 2 is ground. Note that each row is a different "J" number on the board, and the count 1,2,3 etc from the USB connector end. Jim numbered them on his schematic somewhat more sensibly, but they don't match the board.
Looking at the launchpad schematic, are you sure that's not J3?
-corey