8 Dec
2023
8 Dec
'23
10:34 p.m.
The connector placed on the PCB is Samtec FTSH-105-01-L-DV-K Its a .050” pitch 2X5 connector.
This part number is on the schematic CPU page top left.
I purchased a ribbon cable from Mouser and raced it today. This cable will work with the PCB connector.
Mouser # 200-FFSD05D08.0001N
The connector on the TI programming board and likely the lower cost programming board have a different arrangement. My solution is to purchase ribbon cables for both types and cut and splice them together properly.
Bob