I received Bob's launchpad and have found the following:
I am using the Launchpad branch on github.com/AMSAT-NA/PacSatSW
I edited the config.h file to change the pacsat callsign to Ron's call -
k0UND
I started testing and found that the launchpad would transmit OK but it
didn't receive.
I connected the console and found that the launchpad was resetting every
10 seconds.
The reset was precede by "WDxx"
I assumed that the Watchdog was causing the reset and I commented out
"#define WATCHDOG ENABLE"
This change stopped the resets but it still didn't receive.
Pacsat>get ax5043 status provided:
AX5043 dev 1 TX:
FIFOSTAT: 21
PWRMODE:: 0d
XTALCAP: 0
PLLLOOP: 0a
PLLCPI: 10
PLLVCOI: 97
PLLRANGINGA: 49
PLLVCODIV: 24
FREQ 435759999 Hz
MODULATION: a
TXPWRCOEFFB0: 20
TXPWRCOEFFB1: 0
AX5043 dev 0 RX:
FIFOSTAT: 00
PWRMODE: 05
XTALCAP: 0
PLLLOOP: 09
PLLCPI: 08
PLLVCOI: 97
PLLRANGINGA: 08
PLLVCODIV: 30
FREQ 915300000 Hz
MODULATION: 8
TXPWRCOEFFB0: 20
TXPWRCOEFFB1: 0
It looks like the RX dev 0 FIFOSTAT:00 and FREQ 915300000 Hz
could indicate a problem.
Frequency should read FREQ 145835000 Hz
Could this be an AX5043 chip problem?
Any suggestions on what I might do for additional debugging?
Does anyone have an available launchpad I can send to Ron?
Bill
-----------------------------------------------------------
pacsat-dev mailing list -- pacsat-dev@amsat.org
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org
To unsubscribe send an email to pacsat-dev-leave@amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org