Chris,

Here are STL files.  The 64kb file is the box for the prototype board you have.

Let me know if you see any changes that need to be made.

The think the SMA antenna landing places on the larger box will need to be changed.

 

Bob

On Oct 26, 2023, at 9:47 AM, Chris Thompson via pacsat-dev <pacsat-dev@amsat.org> wrote:

Bob,

Very interesting.  If you send over the STL files then I will try printing it here.  It would be nice to have a box.

73

Chris 

On Thu, Oct 26, 2023, 10:21 Bob Stricklin via pacsat-dev <pacsat-dev@amsat.org> wrote:

All,

As some of you know, I managed to break the USB connector off the prototype board while taking it to the AMSAT symposium.

I have repaired it by cutting the end off a USB cable and soldering the leads on directly. It's a little kluge but working.

To protect my connections and to protect the board a little I designed a box and that will be 3D printed. If this works out

and you want one for your board I can pass along the info later. It will take about two weeks to get the box and check it out.

There is an area provided for the USB connector. The connector on the PCB will come off without a lot of angular pulling force.

Also designed a box for the larger CubeSat prototype. Attaching a copy of this too. I add two places to mount an SMA connector for antennas

which may be a stiff piece of wire or connected to a remote antenna. I have order one of these to try out. This is a half baked idea and open for suggestions about 

how to improve on it. I have two covers one for each side so you can get access to parts for testing or changes.

The cost for me to make all four parts is about $46 including shipping and handling. I use something called Craftcloud.com.

Bob

-----------------------------------------------------------

pacsat-dev mailing list -- pacsat-dev@amsat.org
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org
To unsubscribe send an email to pacsat-dev-leave@amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org

-----------------------------------------------------------

pacsat-dev mailing list -- pacsat-dev@amsat.org
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org
To unsubscribe send an email to pacsat-dev-leave@amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org

-----------------------------------------------------------

pacsat-dev mailing list -- pacsat-dev@amsat.org
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org
To unsubscribe send an email to pacsat-dev-leave@amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org