Thanks, Zach. That might mean that what I ordered is different. See in the picture, the place where you added the connector is not populated. (You have to hover over it to get the expanded version in order to see it).
https://www.newark.com/texas-instruments/cc-devpack-debug/debugger-devpak-si...
Well see what happens. Actually do you have a couple of male connectors that you could send me? That way, I could easily add it in and test the new board (assuming it comes...maybe you'd better wait until I get a shipping number :-) )
73,
Burns Fisher, WB1FJ *AMSAT(R) Engineering -- Flight Software*
On Fri, Dec 8, 2023 at 10:32 AM Zach Metzinger zmetzing@pobox.com wrote:
On 12/8/23 08:07, Burns Fisher (AMSAT) wrote:
Note to Pacsat folks: It appears (and Zach can confirm) that Zach must have just ADDED a connector into a DNP space on the board...this is based on the pictures.
Hello Burns and the Pacsat team,
This is not correct; I replace the female 2x5 connector with a male 2x5 shrouded/keyed connector. Instructions, already sent to Bob Strickland, attached.
73,
--- Zach N0ZGO