Ok, that call works and the watchdog resets the IHU as expected. The console is not in wdReports so I could not see if the data ends up in the Telemetry. So I put the call in the PB routine that handles DIR broadcasts. We get a reset as expected when a DIR is requested. But I can't see the missing bit in wdReports. They are all still set. I need to dig a bit deeper as I perhaps don't understand how this is tracked.
73 Chris
On Mon, Oct 2, 2023, 18:44 Chris Thompson via pacsat-dev < pacsat-dev@amsat.org> wrote:
Thanks! Will try that tomorrow.
73 Chris
On Mon, Oct 2, 2023, 17:25 Burns Fisher (AMSAT) wb1fj@fisher.cc wrote:
Call "ForceInternalWatchdogTrigger". That prevents any other tasks from running so after a few seconds, bang! The command to do that is "test internal wd".
There is code for an external watchdog (i.e. using a wd chip outside of the processor) but that won't be used on the Launchpad.
73,
Burns Fisher, WB1FJ *AMSAT(R) Engineering -- Flight Software*
On Mon, Oct 2, 2023 at 4:18 PM Chris Thompson via pacsat-dev < pacsat-dev@amsat.org> wrote:
I made some changes to allow the watchdog to be started. Once I added some calls to the Uplink task and removed the CAN task from the wdReports list it stopped rebooting in a loop due to the watchdog.
I now have it running with the watchdog enabled but I can't cause it to trigger the watchdog from a task. So I either don't understand what needs to be done or the watchdog is not working properly.
The watchdog enabled code is checked into g0kla_watchdog
If there is a simple line of code to trigger the watchdog then let me know. I was just trying to add a suitable delay.
73 Chris
-- Chris E. Thompson chrisethompson@gmail.com g0kla@arrl.net
pacsat-dev mailing list -- pacsat-dev@amsat.org View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email to pacsat-dev-leave@amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
pacsat-dev mailing list -- pacsat-dev@amsat.org View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email to pacsat-dev-leave@amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
participants (1)
-
Chris Thompson