The pause might be because the routine that polls I2c devices is working now, and since there is only one, they all time out. That routine could easily be changed to avoid polling devices we don't have. 73,

Burns Fisher, WB1FJ *AMSAT(R) Engineering -- Flight Software*

On Mon, Aug 7, 2023 at 8:51 AM Chris Thompson via pacsat-dev < pacsat-dev@amsat.org> wrote:

Glad to hear this is working.

I have noticed one thing with version X0.1e. When you press the reset button on the launchpad it pauses for about a second before printing to the console. Is that an intentional change to the boot process? Otherwise we should investigate what changed.

73 Chris

On Sat, Aug 5, 2023 at 5:26 PM Bill Reed via pacsat-dev < pacsat-dev@amsat.org> wrote:

...

The MAX31725 SCL line had a zero ohm pullup. Fixed with 4.7k.....

---

pacsat-dev mailing list -- pacsat-dev@amsat.org View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email to pacsat-dev-leave@amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org

-- Chris E. Thompson chrisethompson@gmail.com g0kla@arrl.net

---

pacsat-dev mailing list -- pacsat-dev@amsat.org View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email to pacsat-dev-leave@amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org