I wigged out on this. I can pick it up in Addison, if you like, or you can mail it to me. Whichever is easier for you. Address is:
7406 Wheatfield Rd, Garland, TX 75044
If I come out there, I have an appointment I need to make in Addison, what's a good day/time for you?
-corey
On Fri, Apr 07, 2023 at 06:21:41PM +0000, Jonathan Brandenburg via pacsat-dev wrote:
I have confirmed I have it... Now, how to best get it to Corey... I can ship it from Addison post office, I can get it to Bill soon (if Corey is going to see Bill at a club meeting or something), or Corey can pick it up in Addison. Thoughts? Jonathan
On 4/7/2023 11:41 AM, Burns Fisher (AMSAT) via pacsat-dev wrote:
Jonathan, did I send you the extra Launchpad that I ended up with? In any case, do you want to give one to Corey? Corey, you may have to solder on some .1" header pins for Jim's board to have all the required connections. I know the headers are DNP around the outside where they are not used, but I'm not sure that all the inside ones are there either.
73,
Burns Fisher, WB1FJ /AMSAT(R) Engineering -- Flight Software/
On Fri, Apr 7, 2023 at 12:30 PM Corey Minyard via pacsat-dev pacsat-dev@amsat.org wrote:
I have the filesystem code mostly ready. I changed the configuration to use 256 byte block. It's available in the filesystem branch. So I will need a launchpad and a board with MRAM. My address is: 7406 Wheatfield Rd, Garland, TX 75044 Chris, you can test it if you like, too. I haven't written any tests for anything yet, that needs to be added. There is code to automatically mount the filesystem on startup and format the filesystem if it detects corruption. There are three new console commands: mount fs, unmount fs, and format fs. The commands are the normal POSIX commands with "red_" prefixed, red_open(), red_close(), read_read(), etc. I need to write a README about how this is all set up. -corey ----------------------------------------------------------- pacsat-dev mailing list -- pacsat-dev@amsat.org View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email to pacsat-dev-leave@amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
pacsat-dev mailing list --pacsat-dev@amsat.org View archives of this mailing list athttps://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email topacsat-dev-leave@amsat.org Manage all of your AMSAT-NA mailing list preferences athttps://mailman.amsat.org
-- Jonathan Brandenburg, KF5IDY
pacsat-dev mailing list -- pacsat-dev@amsat.org View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email to pacsat-dev-leave@amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
participants (1)
-
Corey Minyard