![](https://secure.gravatar.com/avatar/19f5b43b7a178aa4a23399830fab4256.jpg?s=120&d=mm&r=g)
Hello,
I looked through the Fox+ github and was able to find the BUS interface. Looks like they're using these https://www.mouser.com/pdfdocs/qsh-1316995.pdf connectors to interface with the bus. Can anyone confirm that these are correct or point me to where I might find that information? Additionally, does anyone have any info on the placement of the RF inputs and outputs? I have to do some floorplanning, and it would be helpful to know that before starting. See the attached rough placement (scaled proportionally to the actual board).
The bus interface document is here https://github.com/AMSAT-NA/fox-plus/tree/main/systems_engineering/bus_diagrams. Does anyone know which connections we'll be using back to the TMS570 so I can update the schematic? I'm sure we'll discuss tomorrow, but I'll make my own spreadsheet to keep track of it.
Thanks!
Cameron
-------------------------------------------------
Cameron Castillo
KJ7ILB
*P*: (503) 752-8877
--------------------------------------------------
On Wed, Jul 24, 2024 at 8:49 AM Bill Reed via pacsat-dev < [email protected]> wrote:
https://github.com/AMSAT-NA/fox-plus/blob/main/systems_engineering/Fox-Plus%...
pacsat-dev mailing list -- [email protected] View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to [email protected] Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
participants (1)
-
Cameron Castillo