I received the board. I have soldered on the connectors and made the little wiring change you indicated Jim.

It all looks very nice.

I have not done any testing yet but will try to do some soon.

Thanks for all your efforts.

Bob

On May 8, 2023, at 9:42 PM, Jim McCullers via pacsat-dev <pacsat-dev@amsat.orgmailto:pacsat-dev@amsat.org> wrote:

Burns has informed me I reversed my own directions and MRAM fix may not be correct. Please review the attached images and if the board you received looks like the ‘Before’ image break out the soldering iron and swap them. The correct wiring is the ‘After’ image.

I write directions much better than I follow them, even my own.

Burns reports with the changes the AX5043 are ranging correctly and the MRAM works.

Jim McCullers WA4CWI <After.jpeg><Before.jpeg> -----------------------------------------------------------

pacsat-dev mailing list -- pacsat-dev@amsat.orgmailto:pacsat-dev@amsat.org View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat-dev@amsat.org To unsubscribe send an email to pacsat-dev-leave@amsat.orgmailto:pacsat-dev-leave@amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.orghttps://mailman.amsat.org/