On Tue, Sep 27, 2022 at 04:12:42PM -0400, Rich Gopstein wrote:
Corey brings up a good point - what are we trying to accomplish with this board? I might have missed some early discussions about the goal, so forgive me if this has been discussed already.
Yes, it would be nice to have "Commander's Intent" on this. It helps know what to do.
-corey
Are we trying to solve pacsat only, or are we looking to design a more flexible board that might be able to do more than just the pacsat protocol? Is there an advantage to sticking with known off-the-shelf RF parts (i.e. the AX5043), or should we consider doing something more SDR-ish.
That might help us decide if the TMS570 is the "right" processor to get.
Rich
On Tue, Sep 27, 2022 at 3:42 PM Corey Minyard minyard@acm.org wrote:
On Tue, Sep 27, 2022 at 10:03:27AM -0500, Bill Reed wrote:
I agree that Direwolf is probably a better performer. Can we get an
audio
stream out of an AX5043?
It's not so much that we use direwolf, which we can't do. It's if we are going to consider other options.
It sounds like, from Burn's description, that the AX5043 does FM demodulation then AFSK (and I assume HDLC). The packets from AFSK are then sent to the main processor where unscrambling (is this used to pseudo-ramdomize the data, or whiten it?) and FEC is done. That's not standard, as he said.
The FEC is going to go a long way to improving the performance. You could still do better with OFDM, but the current design is probably good enough.
-corey
On 9/23/2022 2:06 PM, Corey Minyard wrote:
I looked a bit last night at the ax5043; I didn't realize (I should
have
remembered) that it doesn't just convert to baseband, it actually demodulates the signal. Are current designs just using that for FM demodulation and doing the AFSK modem in the TMS570? I don't see a way it could do both.
It does appear to do GMSK. The only concern there is if it can support the polynomial used by G3RUH for randomization, I think. I'd be surprised if it didn't. But I don't have the programmer's guide. And it doesn't matter, I guess, if it can't do FM and GMSK at the same time.
For AFSK, you can do a lot better than what a hardware decoder can do. See
https://github.com/wb2osz/direwolf/blob/master/doc/A-Better-APRS-Packet-Demo...
for details. direwolf can pull signals out of the noise in a way that
a
hardware decoder can't. The difference is significant. I've done some thing in my modem that can improve things even more.
There is a similar situation for 9600:
https://github.com/wb2osz/direwolf/blob/master/doc/A-Better-APRS-Packet-Demo...
But that's only the receive side, since this would only be transmitting it doesn't matter.
You could probably do the AFSK demodulation on a TMS570. Modulation of 9600 can probably be table driven, so that should be doable.
Note that there are far better modulation techniques than these.
Almost
anything being done now is using OFDM of some type. VARA is taking
over
in the packet world. All modern modulation for cell phones is OFDM. I think digital TV is, too. OFDM is certainly better for fading and multipath and since it's using low-baud subcarriers I'd guess it's better for doppler, too, but that's just a guess. It would affect the orthogonality (?) of the subcarriers though. Not sure.
You probably couldn't do OFDM on the TMS570. Certainly not 4 channels. You would probably need one of the TI chips that has a separate DSP.
On the ground side, anyone with a sound card modem and a reasonably modern PC could handle it. It would provide better performance, I'd guess singificantly better, than using AFSK and G3RUH. (It would be even better if you could get rid of putting it inside an FM carrier and directly modulate, but that's probably not a practical option.)
Also, on the satellite, if you converted to I and Q directly from RF, and you had a DSP or a fast enough processor, you could get rid of the AX5043s and do the FM and modem in the DSP. I remember seeing single chips that could do this, but I would have to hunt to find them.
Anyway, since we are just getting started, I wanted to point out that options are available that are better from a pure technical point of view than what is currently being proposed. I know there are other concerns like the availability of current working circuits, power
budget,
timeframe, etc.
-corey - AE5KM
pacsat mailing list -- pacsat@amsat.org View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/pacsat@amsat.org
To unsubscribe send an email to pacsat-leave@amsat.org Manage all of your AMSAT-NA mailing list preferences at
pacsat mailing list -- pacsat@amsat.org View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/pacsat@amsat.org
To unsubscribe send an email to pacsat-leave@amsat.org Manage all of your AMSAT-NA mailing list preferences at
https://mailman.amsat.org
pacsat mailing list -- pacsat@amsat.org View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat@amsat.org To unsubscribe send an email to pacsat-leave@amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
pacsat mailing list -- pacsat@amsat.org View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/pacsat@amsat.org To unsubscribe send an email to pacsat-leave@amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org