Hi, I have been trying to receive the telemetry, but my conditions are not good, too much fading... Can anyone tell me which mode should I chose, USB or LSB??? Thanks, and 73s Raydel CL2ESP

----- Original Message ----- From: "Alan P. Biddle" APBIDDLE@UNITED.NET To: "AMSAT-BB" amsat-bb@AMSAT.Org; "SAREX-BB" SAREX@AMSAT.Org Sent: Saturday, August 06, 2011 9:09 AM Subject: [sarex] Anyone using an FT-847 and SignaLink USB to copy ARISSat-1BPSK telemetry?

Hi,

Has anyone used an FT-847 and SignaLink USB to copy, or attempt to copy, the BPSK telemetry? Reports of success or failure equally useful. In either case, it would be helpful to know approximately when the rig was made/purchased, due to the numerous running production mods. There have been a few reports of people being unable to "print" the BPSK telemetry, even though the signal is good, and the CW decodes well.

Please reply off list.

Alan WA4SCA

---

Sent via sarex@amsat.org. Opinions expressed are those of the author. Not an AMSAT member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/sarex

======================================================================= Este mensaje ha sido enviado mediante el servicio de correo electrónico que ofrece la Federación de Radioaficionados de Cuba a sus miembros para respaldar el cumplimiento de los objetivos de la organización y su política informativa. La persona que envía este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas.