Angel,

You will receive the beacon on SSB. You may recall the telemetry used on satellites such as AO-10, AO-13, and AO-40. This is just an enhancement.

The only time you will be transmitting to ARISSat-1 is when the transponder is active. It is a linear transponder, so the usual rules apply.

Alan WA4SCA

-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Thursday, February 10, 2011 6:19 AM To: [email protected]; [email protected] Subject: [sarex] ARISSat-1 Demodulation

Hello to the group:

Have been reading about the satellite and BPSK 1000,but then have a little doubt on two subjects:

1- The BPSK 1000 part, can be decoded on FM, SSB or a combination of both?

2- In the same line, if one TX to it on U/V, what is the mode to use? 70cmUSB/2mLSB, 70cmLSB/2mUSB and/or 70SSB/2mFM?

Thanks in advance. Angel - WP3GW

---- Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/sarex