Tom wrote:

I hve been working the ISS for some time now. Manually tuning the up link and down link frequencies. I use orbitron and it works well for position. Has anyone interfaced orbitron to a TS-2000 so it automatically adjusts the doppler shift during the pass? If you have any information or a link you can send me i appreciate it. Does orbitron do this automatically or do i need to add some other software? Thanks, Tom W5KUB

Hi Tom,

If you have an interface cable between your computer and the TS2000 you are halfway there.

For Orbitron to control the TS2000 you need an intermediate piece of software called WispDDE. you can get it here....

http://www.mederoscnc.com/CX6DD/wispdde/wispdde.htm

In WispDDE you set up a radio profile for the TS2000, Orbitron talks DDE, WispDDE listens and adjust the vfo's in your radio.

I currently use exactly this to control my IC910 and my TS850. I've also used it to control Kenwood TS711 and TS811 before I got the IC910. I also have ARS ( http://www.ea4tx.com/products/index.htm )listening to the DDE output of Orbitron to control my rotators thus leaving my hand free to write log entries etc...

regards

Tim