Jim,
I used the TS-2000 for F3 quite successfully.
1) F3 is using 9k2 so you have to set TS-2000 Menu 50F to 9600 bauds 2) UZ7HO and Chris PacSatGround works superb for F3, and also worked great for MO-112, just a opportunity to thanks Chris again for his great support for the 1st 3B8 bird. 3) If your TS-2000 on 1k2 bauds it is normal that nothing seen on the waterfall.
Hope above helps.
73
Jean Marc (3B8DU)
On Dec 7, 2022, at 8:22 PM, Jim McCullers wa4cwi@bellsouth.net wrote:
Has anyone on the list used a Kenwood TS-2000 to communicate with FalconSat-3? If so, can you pass along the menu settings that work?
I’m using a borrowed TS-2000 and am still in the learning phase on the menu settings.
The audio chain is working with local packet at 1200bps consisting of a DigiRig, using UZ7HO SoundModem and EasyTerm. For FalconSat-3 the chain is DigiRig – UZ7HO hs-soundmodem – G0KLA PacSatGround. Based on my interpretation of the hs_soundmodem waterfall display I’m seeing no data from the TS-2000 when attempting FalconSat-3 communication.
I’m certain I have a menu configuration problem and am looking for suggestions.
FalconSat-3 does not have long to live, predicted to de-orbit in February and is now active for 24 hours or so on the weekends.
Any assistance will be appreciated.
Jim McCullers WA4CWI
Sent via AMSAT-BB(a)amsat.org http://amsat.org/. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/ https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org http://amsat.org/ Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org https://mailman.amsat.org/