Thought I would pass something along to the group, and see if anyone is interested.
While I have been working on perfecting my dual HT handheld satellite operation methods, I discovered that I simply don't have enough hand's, ears, and eye's for everything. With this limitation in mind, I designed a simple circuit board to interface a headset with a pair of HT's, and an audio recorder.
The board as designed can interface to a pair of FT-60's via 3.5mm TRRS cables, or a VX-8 with Yaesu's CT-M11 cable. RX audio is sent to a stereo headset (in mono, of course) and to one channel of a stereo recorder. Microphone audio from the headset mic is sent to the TX radio and to the other channel of the stereo recorder. This way, the recorder should capture both sides of the QSO without issue. The recorder has 2 pot's for level adjustment of both the TX and RX audio levels to the recorder. I also included a trimpot to adjust the bias level of the microphone, should one wish to lower it for any reason, as well as a header to install a PTT switch. My plan was to mount a momentary switch on a handle I plan to make for my arrow antenna.
I will have 2 extra boards available in a few weeks time when they get back from my board fab house. If anyone is interested, I can drop one of these extra's in the mail, and I would ask for about $25 for them. I can make more if there is a large interest from the group.
Enjoy.
Mike, AE0MT.