As someone mentioned earlier. Make sure you are not running HRD or any other application at the same time on that port. Be sure that SatPC is still set up to the correct port.
I am running 64-bit, Windows 10, with Prolific USB-to-serial converters under SatPC 12.8c with no problems on my IC-910.
Reid, W4UPD
On 12/16/2015 12:44 PM, Carmen Peca wrote:
Hi All, I was wondering if anyone has had any problem with SatPC32c and CAT control. I have been running SatPC32b with the 910H and everything worked perfectly. I upgraded to version "C" and the LVB rotor control works fine but I cannot get the CAT working. I made sure everything worked Ok with Ham Radio Deluxe, and it worked flawlessly changed frequencies and mode with no problems using the same com port. If anyone can point me in the right direction to correct this, it would be greatly appreciated.
Thanks,73 Carm,WO3T
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb