A satellite contact isn't a 2 meter or a 70 cm contact it is a SAT contact. If done correctly that is how it will show up. The ones that show up as terrestrial 2m and 70cm or more likely missing the " PROP_MODE" entry.
The ARRL does a nice job of spelling out the parameters here: http://www.arrl.org/files/file/LoTW%20Instructions/N5JB.pdf
The band that matters ( according to the ARRL ) is the band you transmit on, not the band you receive on.
Here is the data you need to log the contact and have it count in LOTW
CALL:6 [The Station You Worked] <QSO_DATE:8> [YYYYMMDD] <TIME_ON:6> [HHMMSS] in utc BAND:4 [The band you transmitted on] MODE:3 [SSB, CW, FM, etc.] <PROP_MODE:3>SAT <SAT_NAME:4> [The bird you used] <EOR>
Please note it is VERY unforgiving as far as entries go. Things must be spelled correctly! The [] above should not be included.
73, Joe kk0sd
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Ted Sent: Thursday, January 20, 2011 9:09 PM To: amsat-bb@wd9ewk.net; amsat-bb@amsat.org Subject: [amsat-bb] QSOs in LOTW, and a question
Well, Patrick, I don't have an answer for your question, but the question brings up another old issue. My brand new LoTW VUCC account shows 11 sat contacts and 2 440mhz contacts (sat contacts). So, some are uploading sat contacts as 440 contacts and some as 2m contacts. Same issue on eQSL. I had this debate with someone here awhile back. It seems to me that the consensus is that we log an FM sat contact as a 440 contact. But some want to log as a 2m contact since the tx was on 2m.
We better have some conformity on this or some of the LoTW data will not match
I'm going to continue to use paper until I get my VUCC Satellite, but it would save a lot of trouble in the future if we all get on the same page
73, K7TRK listening....
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Patrick STODDARD (WD9EWK/VA7EWK) Sent: Thursday, January 20, 2011 6:38 PM To: amsat-bb@amsat.org Subject: [amsat-bb] XE2/WD9EWK QSOs in LOTW, and a question
Hi!
I just uploaded all of my XE2/WD9EWK satellite QSOs to LOTW. Only 242 QSOs, and it took me about 20 minutes to massage my spreadsheet log into an ADIF file suitable for LOTW. Upon uploading my QSOs, I had 32 QSLs from 242 QSOs. Not bad at all! I will keep at it tonight, trying to get some of my Canadian QSOs (as VA7EWK and CJ7EWK) into LOTW this evening. The PDF by N5JB was extremely helpful. I uploaded only the 7 fields necessary to make an LOTW QSO entry, even though I have a lot more data for each QSO in my spreadsheet.
I have a question for those who have uploaded AO-16 QSOs to LOTW. For the Mode field, do you use FM as the mode you transmitted, SSB for the mode you received, or something else? Just trying to make sure I get this one right, since I have some AO-16 QSOs as CJ7EWK (and a bunch more as WD9EWK).
Thanks in advance, and 73!
Patrick WD9EWK/VA7EWK http://www.wd9ewk.net/
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb