[amsat-bb] SATPC32 with 2 radios

Hello, I'm trying to run an Icom706 and an Icom R10 with SATPC32.So far the only thing that works is the R10.The 706 will respond to  mode changes(CW to SSB,FM etc.).But it won't track the program and the program doesn't respond when I change frequencies.When I change satellites the 706 will change to the right frequency but then it won't track the frequencies on the program.I believe  I have everything right.To clearify,My 706 works fine when  the address are set to TX and RX, it just doesn't work when set to TX.I should note.I haven't connect both radios together,but was trying each separately. Thanks in [email protected]