For Sale: (Too much stuff laying around, this transverter works fine)
Ten-Tec 1210A 2 Meter transverter for sale - $100 (plus shipping)
Details: http://www.tentecwiki.org/webarchive/1210/
Allows you to get on 2 Meters (all mode, transmit and receive) from a 10 meter rig (even the HF Flex DSP radios). With a Flex it allows you to "see" the activity output from 2m passband of a satellite.
Also worked great with the Icom IC-703+ for 2m capability.
Full 10 watts RF output. ALC-controlled 10M input handles power range of 4 to 20 watts. Solid-state T-R switching. Engineered for optimized l0M-2M conversion performance. 1.5"H x 5 "W x 8"D.
This is a Factory Built transverter (not the kit version)
Contact Mike W4UOO if interested.
*Model 1210 Specifications:*
- *Frequency Coverage: 144-148 MHz band, typically 144-145.7 MHz, based on 28-29.7 MHz tuning range of most 10 meter transceivers. 116 MHz local oscillator.* - *Power requirement: 12-14VDC, 100 mA. receive, 600 mA in transmit with no drive, 2.0A on transmit at 10 watts output.* - *Construction: Black texture painted clamshell-type steel top and bottom, aluminum panel chassis and heatsink. One 5.5 "X 3.75" double-sided circuit board.* - *Semiconductors: 2 IC's, 13 transistors, 25 diodes. RF final. BLW81.*
*TRANSMIT:*
- *RF Output: 10 watts maximum an CW and FM, 10 watts PEP on SSB.* - *T/R Switching: solid state, RF sensing.* - *Output Power Adjustment Range: 2 to 10 watts.* - *Spurs and Harmonics: Greater than -56 dBc at 10 watts out.* - *Standard TX Hang Time: Approximately 1 second.* - *Input Drive: Less than 0.5 watts input to key TX mode. 4 watts input for 10 watts output. Input drive level is ALC controlled between 4 and 20 watts. Input SWR less than 1.5:1.*
*RECEIVE:*
- *Noise figure: less than 7 dB.* - *Conversion Gain: Approximately 17 dB.* - *Image Rejection: Greater than 60 dB.* - *Input Intercept: -6.5 dBm typical.*