In SatPC32 - You must not only change the "Turning point" from South to North, but also set the max elevation to 90 not 180 degrees.
Then and only then the option to set max azimuth to 450 is enabled.
This is under set | rotor setup.
Just thought someone else may need to know.
Thanks and 73, Joe kk0sd
-----Original Message----- From: AMSAT-BB [mailto:[email protected]] On Behalf Of Gary Mayfield Sent: Saturday, May 02, 2015 10:19 PM To: [email protected] Subject: [amsat-bb] FODTrack with G-5500 Rotator
Well, I saw my last message so I will try again.
I have FODTrack controller that I use with SatPC32 v12.6 on a WindowsME laptop. Old, I know, but it works just fine and has worked fine for many years with a G-5400 rotator..
Newer versions of SatPC32 do not like WindowsME and newer operating systems do not like the FODTrack.
We intend to drag it out to Field Day for the ooh and awe factor of automatic rotator control. Unfortunately I will be working with kb0lcr's G-5500 rotators instead of my G-5400 rotators as I am too lazy to take the 5400 down.
Is there a way to make the FODTrack work with the G-5500 rotator and its different azimuth scale?
Thanks and 73,
Joe kk0sd
_______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb