You may have already tried this, but I would download the TH-F6 memory utility from Kenwood and try backing up or changing things on the radio with that first. Once the "commercial app" is working, you know your interface is good, and you can then move on to manually commanding the unit. Baby steps =)
Try this link: http://kenweb1.kenwoodusa.com/KenwoodPortal/KenwoodComm/Resources/AMA_Softwa reRCPMCP/MFX100.exe
As found on this page: http://kenweb1.kenwoodusa.com/KenwoodPortal/KenwoodComm/Support/AMASoftwareR CPMCP.aspx
73 K1gto
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Robert Bruninga Sent: Tuesday, November 21, 2006 3:30 PM To: [email protected] Subject: [amsat-bb] TH-F6 Remote Control?
Has anyone tried remote control of the TH-F6 HT?
We built the interface shown on http://www.misobras.com/esquemas/ham/MOD/kenwood/TH-F7-1.htm
But using hyperterm and typing symple commands we get nothing. We have pressed the menu-9 key and set it to PC. We type a simple command like "ANT" and expect it to come back with the setting in response.
Anyone done this? Bob
_______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb