[amsat-bb] FTM-100DR APRS path for ISS?

Apparently, the current version of the FTM-100DR cannot set an APRS path for digipeating via the ISS.

W9BU reports:

See page 41 of the FTM-100DR APRS manual. Your choices for digipeater route are "OFF", "WIDE1-1", or "WIDE1-1,WIDE2-1". Other than those three selections, the route is not configurable.

This leaves out via ARISS, or the universal via APRSAT which should be supported by all APRS satelliites.

Bob, WB4APR