On 11/16/2020 1:33 PM, Mark Hammond via AMSAT-BB wrote:
Try the CAT menu, then select Speed X 5 or X 10. Should do just want you want
Mark et all:
I setup another receiver to monitor Satpc32's TX Doppler correction and found that the CAT speed produced only a slight change. On the other hand, the CAT tuning interval had a profound effect and I found that a value of zero produced smoothest Doppler correction for CW.
Increasing the interval to a value of 10 produced enough lag time to hear the CW tone change abruptly so zero seems to be the way to go.
On 11/15/2020 5:52 PM, Stefan Wagener wrote:
Please refer to Section 4 of the manual (included with the software). Since you seem very unfamiliar with the software, I highly recommend you spend some time reading it.
I did read the manual Stefan and the author suggests using a CAT tuning interval of 50 to 80 which seems fine for SSB, but that value is too coarse for CW.
At least that's been my experienced.
Tony -K2MO