Hi Chuck,
Very easy, you need to put the frequency in Doppler.SQF file see below example from mine and use the CAT drop down menu to choose the L/V or U/V Fx. You may wish to copy the lines I am sending in your Doppler.SQF as already tested and works fine for me.
AO-92,145880,435350,FM,FM,Nor,0,0,Voice U/V AO-92,145880,1267300,FM,FM,Nor,0,0,Voice L/V
PCsat32 is quite new to me also and I took about a week to be fully conversant with it and can understand your difficulties. Once you master it you will realize that it is probably the best tool we have for the birds. Somehow tricky at first glance to set it up right but when done it is so good compared with other soft I used for several years. I am really amazed and satisfy with it and it is surely worth the few $ spent particularly that the money goes in satellite projects.
Hope this help.
73
Jean Marc (3B8DU)
On Feb 28, 2018, at 9:17 PM, CEE [email protected] wrote:
with completion of a home brew "cheap yagi" on 1296, would attempt to work AO-92 on the L/v band. Can anyone suggest how I switch from the U/v configuration to L/v on SATPC-32 and other related info?
Thanks - Chuck N7BFO
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb