RAFT-REENTRY CAMPAING web page now has a Doppler Plot against TIME: http://www.ew.usna.edu/~bruninga/craft/save-raft.html
To our surprise, the RAFT XP-217 radar receiver hears the Radar sidelobes as long as it is above the horizon! I guess that makes sense for a 700 KW transmitter. Even if we are not in the 80 Meggawatt main beam, the radar receiver does still hear it (even though its RX sensitivity was intentially only designed to be only - 40 dBm? or so)...
Now, is there anyone on the AMSAT-BB that would like to analyze this portion of the Doppler Plot and prove the timing. The only thing I'd like to confirm is the added inflection point at the start (probably due to the bistatic radar situation) which makes this different than the usual "S" plot with only a 3rd order curve.
Bob WB4APR
-----Original Message----- From: Robert Bruninga [mailto:[email protected]] Sent: Monday, May 28, 2007 12:26 AM To: [email protected]; [email protected]; 'Matt Bennett' Cc: 'Lauret & Henk'; 'Ron Hashiro'; 'Dieter Schliemann'; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected];
Subject: RAFT Voice may notebe fully set?
I blew my pass.
It arrived about on schedule (Keps dated 27th at 1313z.) At first I got no response to my LOGGON attempt. SO I assumed that the southern stations attempts had locked me out. So I forced a disconnect so that I could reconnect to RAFT and at least check out the voice.
That was successful, but then I saw the earlier password challenge coming back. At this time I was no longer connected and didn't have time to re-sequencce everyting.
SO my commaindng was a failure due to cockpit error.
BUT when I CONNECTed RAFT, the VOICE came up just fine, but
did
NOT speak any packets sent to it. So I wonder if all settings are correct. Maybe the European or other command stations not in the footprint of the Southern USA FENCE could logon and SET these settings:
MYAPRS TALK MXMIT ON
It is clear that the others ARE set OK, since CONNECTing RAFT does bring up the voice transponder. SO these are OK and do
not
need to be confirmed.
CTR A OFF CONOK ON CMSG OFF
But if MYAPRS TALK is not set or if MXMIT ON is not on, then
the
voice module will not speak APRS messages...
Bob, WB4APR