HI
I cannot seem to get the ISS portion of the program to operate properly with FT-847
1. Regular SatPC32 program works as it should
2. In ISS, I have CAT control (trigger on/off with C
3. SAT on the radio is turned off
4. In CAT, I can select the pair for the repeater and the downlink freg will appear on the radio (VFO A) The initial freq in the program appears but does not update further
5. Manual says "With the Yaesu FT-847 only use the 'TX' / 'RX' controls of SatPC32ISSto switch
the radio to TX or RX, rsp. Otherwise the VFO can't be tuned to the TX frequency
before the radio is switched to TX."
Program is not displaying TX/RX buttons or controls nor am I able to key tx with + or - keys on 10 key pad
6. FYI, there are no files shown in any o the aux files. (but, I suspect that info is pulled from the main program)
I must have something set wrong. Any help appreciated
73,
Ted
K7TRK