Hello Brian, i guess 1 connector per antenna.... so for circular polarisation this will never work! for using both coupled, you can use a 2m!! powerdivider for 2 antennas, as for stacking 2 identical 2m yagis.This will work also for the 70cm because it is 3/4L from 2m. You can use 2 identical 50ohm coax feeders to each antenna then. To the other hand at the powerdivider use a 2/70 diplexer with the common to the powerdivider, the other side to each band output from trx. The DK7ZB info is just a 2 port powerdivider and has nothing to do with phasing lines. Best is to use a crossyagi for 70 and a crossyagi for 2m, + with a polarisationswitch per band you can do H V RHCP and LHCP. I made this myself with coax lenghts corrected to less then 1°. Works FB but is overkill, because switching between H or V should be enough, but i made this for fun.
73's Jerry,ON4CJQ
Van: "Brian Clark" decompudoc@gmail.com Aan: "amsat-bb" amsat-bb@amsat.org Verzonden: Maandag 29 november 2021 05:22:25 Onderwerp: [AMSAT-BB] Phasing Cable/System - 2 Dual-Band Yagi's
Hello Everyone,
I have two Dual-Band 2 Meter/440 Yagi's that I would like to use on a Rotator, with one in the vertical polarity and one in horizontal.
Is there a phasing circuit or system that someone can recomend to allow both of these antennas to coexist on one coax input to my radio?
Thanks,
Brian KF6FES
-----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org