5 Aug
2007
5 Aug
'07
10:40 a.m.
On Jul 31, 2007, at 8:08 AM, Scott Wilson wrote:
- This is more of a comment... I'm wagering the uhf version
doesn't work at all... measurements are given to the hundreth of an inch - and then you solder a big ring lug to the end of it!
Scott - A good rule of thumb for tolerances is for them not to exceed more than a degree of wavelength, with 360 degrees being one wavelength. At 432 MHz this is about 0.2 cm or about 0.080 inches, which can be measured accurately enough with a steel rule. - Duffey
-- James Duffey KK6MC/5 Cedar Crest NM 87008 DM65