Got my 817 hooked up to macDoppler ready for the next pass over Europe.
Sent from my iPhone
On 8 Oct 2015, at 20:54, David Rush [email protected] wrote:
Yes, as I understand it it should be on 145.980 MHz.
I've got my Funcube Dongle Pro+ plumbed into FoxTelem. It seems to lie in wait around 145.995-ish, but when I keyed up an HT at 145.980 it slinked its way down and centered on the HT's signal (even without "Find Signal" checked).
I even tried playing the test telemetry audio on another computer, with the HT's mic held up near the speaker. I don't think it decoded anything, but since the telemetry is "sub-audible" I imagine it got filtered out by the HT. The squiggly lines on FoxTelem seemed to react to the noise, so that confirms that it's hearing something.
I think I've got mine ready and waiting for the next fly-over, which SatPC32 says starts at 23:57z down here in EM72 land.
73, David, ky7dr
On 2015-10-08 11:19, Bob KD7YZ wrote: I have the fox-1 telemetry program running; am tracking using the guesstimate Keps .. but what is the freq for telemetry? Currently I am on 145.980 FM
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb