Peter,
You'll have to find your Standard.sat file and edit it. You probably have an entry there that is confusing SatPC32, such as a satellite named XW-3(CAS-9), or some other bird the program can't find.
It's a hidden file, so first step is to instruct Windows to show hidden files: https://support.microsoft.com/en-us/windows/view-hidden-files-and-folders-in...
Then navigate to the previously hidden folder: C:\Users\YOURUSERNAME\AppData\Roaming\SatPC32 Note that you will have to replace YOURUSERNAME with your actual Windows User Name!
Scroll down to Standard.sat and open it. You may have to tell Windows to use Notepad or your text editor of choice, because it won't recognize the .sat extension.
Change or delete the offending entry, being careful not to mess up the format of the file. Most likely, you'll be changing something to do with CAS-9 to XW-3. Then do remember to save the file before closing the text editor.
Just to be on the safe side, while you're in there, also find the file named AmsatName.txt and add this line to the bottom, again being careful not to mess up the format of the file: 50466 21131B XW-3 Save the file, then try opening SatPC32 once again. This last step is not technically necessary, but it can't hurt, especially with a new bird that may still have several names.
Good luck and happy New Year! -- Mark D. Johns, KØJM AMSAT Ambassador & News Service Editor Brooklyn Park, MN USA EN35hd ----------------------------------------------- "Heaven goes by favor; if it went by merit, you would stay out and your dog would go in." ---Mark Twain
On Fri, Dec 31, 2021 at 3:04 PM PETER BUDNIK kb1hy2@comcast.net wrote:
Now I get Error while loading the standard SAT! The program will be closed
Hit OK and SATpc32 won't open.
Any idea's
Peter,KB1HY
On 12/31/2021 3:25 PM walterh@k5wh.net wrote:
If you edit your doppler file, to take out the (CAS9) so it only shows XW-3, then it will match the keps that were updated today, and the error should no longer be present.
However, you will notice that the list of satellites have been duplicated.
Walter/K5WH
*From:* Richard Lawn rjlawn@gmail.com *Sent:* Friday, December 31, 2021 1:35 PM *To:* Amsat BB amsat-bb@amsat.org *Subject:* [AMSAT-BB] Problem with SatPC32 and new Bird
I thought I had everything set up for XW-3(CAS-9) perfectly until I went to update the Keps today. After updating Keps (NASAbare) I could not close the window and kept getting a German error message which of course I have no idea what it means. I'll try and attach the message though I suspect it might be stripped.
73 and HNY
Rick, W2JAZ
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org