I have several ways to do it.
I have one of the old Hamtronix R139 crystal controlled receivers I built from a "kit".
It wasn't what I'd really call a kit, more like a box of parts with some instructions. It works fine once you get it operating.
I also have an old Radio Shack scanner I "converted" by pulling out the IF filter and replacing it with a fixed capacitor. It also works "OK", and considering I have about $5 in it, it's winner in the "Bang-for-the-buck" category.
And lastly, I have several of the USB "dongles", including both versions of the FunCube dongle.
They all work fine using an M2 2 Meter eggbeater with an SSB Electronic 2 Meter preamp mounted at 20'.
Yes, I know I'm using the antenna and preamp way "out of band", but it doesn't seem to hurt. I get solid copy from when the APT birds are above 10*, and that's plenty good for me.
73, Jim KQ6EA
On 06/14/2014 03:00 AM, Lizeth Norman wrote:
Hi all! What are people using to receive APT on 137 MHz?. Since I do have an az el rotator, was possibly looking for a homebrew yagi design. What say you?? Norm n3ykf Currently very bored in Lima, Peru. _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb