If you're using AF in Foxtelem (meaning, not IQ...), I suggest you try to get the carrier frequency around 1400-1500 at AOS. It shows up in very light grey text, between the two "wave forms"...if you look carefully, you'll see it. These details are only as good as the TLE data! So update frequently, especially now right after launch (maybe every couple of days?).
Currently, here is what I use in SatPC32--but it varies by radio to get the 1400-1500 Hz carrier!
For my TS-2000x: HuskySat-1,435799.8,145950.0,USB,LSB,REV,0,0,Telem Beacon
For my IC-9700: HuskySat-1,435798.4,145950.0,USB,LSB,REV,0,0,Telem Beacon
Hope that helps with both specifics as well as strategy!
On Wed, Feb 5, 2020 at 12:18 AM Mike Lucas via AMSAT-BB [email protected] wrote:
Would someone please repost the corrected downlink Telem frequency to use for Doppler control.
Sent via AMSAT-B[email protected] AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb