Hello Jack, I made a test with my Windows 10 Laptop. I has no physical serial port, of course , but I have a 4-port USB-to-Serial adapter and in the ServerSDX setup window I chose one of the generated (virtual( serial ports. After a re-start of SatPC32 I entered an elevation and azimuth value in the SatPC32 menu "Rotor" and clicked "Execute". Then the chosen values appeared in the ServerSDX window. That means that the DDE output from SatPC32 to ServerSDX works. If i don't choose a valid COM port in the ServerSDX setup window there is no DDE output to ServrSDX, however.
73s, Erich, DK1TB
. Am 23.05.2017 um 17:29 schrieb Jack Strother:
Hello All,
I apologize in advance if this query is duncile, However
I cannot seem to get the DDE service to talk to the rotor ( Yeasu GS-232 ) interface.
I can manually send data to the LVB tracker, but the program will not send data to the port via the Yeasu GS-232 interface.
I have the same issue with HRD as well, however PstRotor software works fine.
I am running on a Windows 10 Note book..
Any help appreciated!!
I have been through the manual, help files and the like. I am about ready to toss it all out the window.. (Pun intended !!)
TIA
KD9ERA
B.J. Strother
Granger, IN
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb